BY-PASS FILTERS & SYSTEMS

 FOR NEAT CUTTING OILS 

(applications involving metal residue)  

Trap the iron that damages your tools

Magnet filters or fluid line filters reduce tool and work piece damage caused by ferrous metal chips, filings, and dust which get into coolant systems during burnishing, drilling, milling, grinding, broaching and other machining operations. They prevent ferrous particles from flowing into reservoir and back to the work piece. Less down time due to tool breakage. More work hours between tool reconditions. 

Ferrous materials and other suspended materials are automatically removed from the fluid, relatively dry. 

Applications already benefiting include:       

Grinding, Honing & Lapping Machines   Manual & CNC Machinery          

Fine Finishing Operations  Wire and EDM Processes   Injection Moulding     

Cooling & Heating Systems    Industrial Part Washing   Press Brake Lubricant   Transmission & Gearboxes    Engines   Post Drill Head Operations  Saw Sharpening   Pump Protection     Pre Filtration        

Diesel Storage Tanks  Quenching Operations        Plant and Machinery

ADD THE MICROMAG TO THE KLEENOIL MICRON FILTRATION SYSTEM FOR ULTIMATE OIL CLEANSING. 

      Contaminated Core

       Cleaning Core

            Clean Core

MAGNETIC FILTRATION:

The system Incorporates the most powerful, natural Rare Earth Magnetic material to produce extreme magnetic flux fields removing metal debris from the oil. 

With the convenient mount on the Kleenoil Unit the Micromag is easily viewed, whereby oil from the source is clearly seen passing through the pump into the magnetic core where ALL metal debris is visibly removed, then through into the Kleenoil Units where it continues to be ‘polished’. 

These systems are often used as a pre-filter to limit contaminants reaching subsequent filtration equipment.  

Kleenoil Mag Filters are suitable for removing ferrous sludge and chips on both water soluble and neat oils. Typical applications are center less and heavy stock removal grinding machines, honing, gear cutting and chip-producing machinery.

THE MAGNETIC PROCESS …

Contaminated fluid enters the inlet to be equally dispersed via radial channels, thus slowing the fluid down to pass outside the centrally mounted ‘rare earth’ magnetic core. 

You will see the particle capture, as more particles attract to the core the magnetic flux circuit geometry generates a controlled build up of contamination, so ensuring that the filter will not block  - the filtered fluid then flows through return slots through the center exiting via the outlet into the Kleenoil System. 

THE FILTRATION PROCESS:

The oil has been cleansed of all magnetic particulate, to be passed through the Kleenoil System, either in single, twin or four unit form, whereby all remaining contaminates are removed through cellulose media down to 1 micron relative as well as all water. ( pump & motors are available 240v / 110v in any configuration of sizes to suit the application,)