magnetic lift

Ultralift Plus the safest lifter in the World......

The lifter includes:

1. 'Safety Shim' (patented)

For pre-testing any load. Place the 'Safety Shim' on the load with the Ultralift Plus on top. Activate the Ultralift Plus and attempt to lift the load a very short distance. If the Ultralift Plus holds the load with the 'Safety Shim' then a 3:1 safety factor is guaranteed without it. The ability to pre-test any load could be especially useful if you lift loads of differing sizes, materials and surface finishes.

2. Safety catch

When the Ultralift Plus is 'on' the operating handle is held by a safety catch to prevent accidental switching. The safety switch is release by pressing a button on the end of the operating handle.

3. Lifting eye mechanism (patented)

Patented mechanism prevents any switching, accidental or otherwise, of the Ultralift Plus while it is holding a load.

With 5 sizes available, the Ultralift Plus lifting magnet is suitable for lifting a wide range of loads in the factory or workshop. It's capable of lifting both round and flat section loads.

The Ultralift Plus uses high powerneodymium 'rare earth' magnet material for the highest power to weight ratio. The material is permanently magnetic, and switching the Ultralift Plus on and off is manual, so no power is required and it has no operating costs. You can use it almost anywhere - just hook it to your hoist or crane.

With a lifting magnet a load can be hoisted safely by just one man. And you'll have no more worries about the stability of a load once it's lifted (especially when it's been pre-tested to ensure a 3:1 safety factor with the 'Safety Shim'). Storage of handling of loads can be more efficient as you only need access to a load's top face.