micromag filtration

MICROMAG

OTHER PRODUCTS IN THE RANGE

Filtramag: , for precision grinding machines and fine finishing operations

Automag:, fully PLC controlled filtration system generally used in 24/7 critical operations.

MicromagHP: High pressure version of the standard Micromag

HOW IT WORKS

Benefits over conventional filtration
Sub-micron filtration efficiency: if the particle is magnetic Micromag will remove it
No loss of fluid - no oil sodden cartridges to dispose of No pressure drop even when fully loaded with contamination No consumables required, ever! Once purchased the unit does not require ongoing spending. Operating costs are minimal
No maintenance required - only operator intervention to clean. Reduced environmental impact: all you are left with is metallic material which can be collected by your material supplier
Capable of removing abrasives and non-magnetic material by means of heterocoagulation
Reduce machine downtime, increased productivity
Visual inspection of fluid being filtered

Before you consider spending thousands of Rupees on your next filtration system, consider Micromag.

The system incorporates the most powerful, natural Rare Earth Magnetic material to produce extreme magnetic flux fields removing metal debris from the oil. These systems are often used as a pre-filter to limit contaminants reaching subsequent filtration equipment.

Kleenoil Mag Filters are suitable for removing ferrous sludge and chips on both water soluble and neat oils. Typical applications are center less and heavy stock removal grinding machines, honing, gear cutting and chip-producing machinery.

Contaminated fluid enters the inlet to be equally dispersed via radial channels, thus slowing the fluid down to pass outside the centrally mounted ‘rare earth’ magnetic core, the filtered fluid then flows through return slots through the

center exiting via the outlet into the Kleenoil System.

CLICK ON IMAGE TO SEE APPLICATIONS

Contaminated Core

Cleaning Core

Clean Core

MAGNETIC FILTRATION:

The system Incorporates the most powerful, natural Rare Earth Magnetic material to produce extreme magnetic flux fields removing metal debris from the oil.

With the convenient mount on the Kleenoil Unit the Micromag is easily viewed, whereby oil from the source is clearly seen passing through the pump into the magnetic core where ALL metal debris is visibly removed, then through into the Kleenoil Units where it continues to be ‘polished’.

These systems are often used as a pre-filter to limit contaminants reaching subsequent filtration equipment.

Kleenoil Mag Filters are suitable for removing ferrous sludge and chips on both water soluble and neat oils.

Typical applications are center less and heavy stock removal grinding machines, honing, gear cutting and chip-producing machinery.

THE MAGNETIC PROCESS …

Contaminated fluid enters the inlet to be equally dispersed via radial channels, thus slowing the fluid down to pass outside the centrally mounted ‘rare earth’ magnetic core.

You will see the particle capture, as more particles attract to the core the magnetic flux circuit geometry generates a controlled build up of contamination, so ensuring that the filter will not block - the filtered fluid then flows through return slots through the center exiting via the outlet into the Kleenoil System.

CLICK TO VIEW MICROMAG DATA SHEET