Home | Products | Testimonials | Dealers | Engines | Hydraulics | Customers | Services | Contact Us 

MICROMAG 

             FILTRATION SYSTEM

OTHER PRODUCTS IN THE RANGE

Filtramag, for precision grinding machines and fine finishing operations

Automag, fully PLC controlled filtration system generally used in 24/7 critical operations.

In the Micromag Filtration System, contaminated fluid enters the inlet to be equally dispersed via radial channels, thus slowing the fluid down to pass outside the centrally mounted ‘rare earth’ magnetic core, where you will see the particle capture, as more particles attract to the core the magnetic flux circuit geometry generates a controlled build up of contamination, so ensuring that the filter will not block  - the filtered fluid then flows through return slots through the center exiting via the outlet into the Kleenoil System.

The oil has been cleansed of all magnetic particulate, to be passed through the Kleenoil System, either in single, twin or four unit form, whereby all remaining contaminates are removed through cellulose media down to 1 micron relative as well as all water. ( pump & motors are available 240v / 110v in any configuration of sizes to suit the application,  )