KLEENOIL FILTRATION

- Products 

- Oil Cleaning Systems

- By-Pass Filters

- Cartridges

- Air Precleaner

- Watch Videos  

 

ECLIPSE MAGNETICS

- Products

- Watch Videos 

                                                                                                                           

                                                                                     

                         Home | Our Network | Customers | Services | What's New | Careers | Contact Us

 

         

                                    

                                                        

                                                  

                                                 

 

 

 

The KLEENOIL cartridge is made of densely wound pure coniferous long fiber wood pulp paper. It 

    is held together in a material casing and comes in specified sizes for use in the appropriate filter 

    housings. The Kleenoil Cartridge will meet NAS12 even on a single flow and after equivalent 5 

    passes through the filter, it will reach NAS6. This is substantially cleaner than most new oils.    

 

Action Of Cartridge :

 

The filter cartridge acts both by absorption in a continuous recycling process. The long fibers of the 

   paper attract the water formed either through the combustion process or by condensation and 

   absorb it like a sponge, at the same time rejecting the larger oil molecules which are forced to 

   pass between the tight windings of the cartridge. 

   As the oil passes through the cartridge minute carbon, wear metals and silicon are extracted 

   from the oil by adhering to the any surfaces of the filter – a process known as adsorption.  

 

Thus, the cartridge, by removing water inhibits the production of acids which both degrade the 

   oil and cause excessive wear. The simultaneous removal of minute contaminants as they occur 

   enables the oil life to be extended within its original operating specification.

 

While the filter is extracting the water and contaminants it is continuously safeguarding 

    the desirable elements compounded within the actual oil in use. 

    These typically include, dependent on use, dispersants, detergents, oxidation and rust inhibitors, 

    metal de–activators, pour–point depressants, VI improvers, lubricity agents, fungicidal,  

    anti-foaming and gelling additives. These additives are held in suspension and their levels can 

    be critical if the oil is to maintain its beneficial effect.

 

 

                                                                                                                                                                                                        © 2012 Kleenoil Filtration Ltd. All Rights Reserved. Terms of Use 

                                                                                                                                           © iltration Ltd. All Rights Reserved. Terms of Use