The KLEENOIL cartridge is made of densely wound pure coniferous long fiber wood pulp paper. It is held together in a material casing and comes in specified sizes for use in the appropriate filter housings.    The Kleenoil Cartridge will meet NAS12 even on a single flow and after equivalent 5 passes through the filter, it will reach NAS6. This is substantially cleaner than most new oils.    

Action Of Cartridge :

The filter cartridge acts both by absorption in a continuous recycling process. The long fibers of the paper attract the water formed either through the combustion process or by condensation and absorb it like a sponge, at the same time rejecting the larger oil molecules which are forced to pass between the tight windings of the cartridge. As the oil passes through the cartridge minute carbon, wear metals and silicon are extracted from the oil by adhering to the any surfaces of the filter – a process known as adsorption.  

Thus, the cartridge, by removing water inhibits the production of acids which both degrade the oil and cause excessive wear. The simultaneous removal of minute contaminants as they occur enables the oil life to be extended within its original operating specification.

While the filter is extracting the water and contaminants it is continuously safeguarding the desirable elements compounded within the actual oil in use. These typically include, dependent on use, dispersants, detergents, oxidation and rust inhibitors, metal de–activators, pour–point depressants, VI improvers, lubricity agents, fungicidal, anti-foaming and gelling additives. These additives are held in suspension and their levels can be critical if the oil is to maintain its beneficial effect.

Specification :  

 

                                SDC 1888 Super Duty Filter Cartridge for use with SDU 9788 Super Duty  Unit             

               

Application :      1. As an engine oil filter for sumps upto 80 ltrs

                   2. As a hydraulic oil filter.

                               3. As a diesel fuel filter.

Water Retention

Level :                1.12 ltr( to less than 0.05%)

Weight and

dimensions :      Height : 110mm

                             Diameter :198 mm

                             Weight : 975 gms (+/- 5%)

 

Oil Flow Rate :   Output levels are dependent on viscosity, temperature, degree of  

      contamination, and oil pressure.

                              Guide – For SAE 15w/40 oil @ 700 c /60 psi/4.2 kgcm2 – 2.0 lpm to 3.0 lpm

Operating

Temperatures :   Within operating specifications of engine, gear and hydraulic oils.

Filtration Level : Particulate contaminants in accordance with BS 5540 part 4:1981 and  

                           ISO/DIS 4406. ISO 14/9 equivalent to NAS 1638 class 6.( Hydraulic oil specification).  

 

                                HDFC 1878 Heavy Duty Filter Cartridge for use with HDU 9778 Heavy Duty  Unit      

                      

Application :      1. As an engine oil filter for sumps upto 40 ltrs

                  2. As a hydraulic oil filter.

                              3. As a diesel fuel filter.

Water Retention

Level :                0.56 ltr( to less than 0.05%)

Weight and

dimensions :      Height : 110mm

                              Diameter : 143 mm

                              Weight : 475 gms (+/- 5%)

 

                               LDFC 1868 Super Duty Filter Cartridge for use with LDU 9768 Super Duty  Unit                              

Application :      1. As an engine oil filter for sumps upto 15 ltrs

                  2. As a hydraulic oil filter.

                              3. As a diesel fuel filter.

Water Retention

Level :                0.07 ltr( to less than 0.05%)

Weight and

dimensions :      Height : 110mm

                             Diameter : 103 mm

                             Weight : 200 gms (+/- 5%)

 

BACK

 

© 2008 Kleenoil Filtration Ltd. All Rights Reserved. Terms of Use.