BY-PASS FILTERS & SYSTEMS

MAGNETIC FILTRATION

BY PASS LUBOIL FILTER

Kleenoil By-pass Filter is an additional oil filter fitted in a by-pass route on an engine or machine without making any alteration to the existing system. It is capable to retain contaminant particles, carbon, wear metals down to under 1 micron and totally absorbs water. 

It maintains the oil within its operating specifications therefore its life is increased resulting in savings in oil cost.   

The Kleenoil By-Pass Filter works by taking a percentage of the oil flow and filtering  abrasive contaminants such as carbon, wear metals, silicon etc. down to less than one micron and totally removes water. 

TO SEE SOME FITMENTS OF THE LUBOIL FILTER

are formed, the Kleenoil System will enable oil to be retained in use considerably longer than is usual. The principle of “By-pass Filtration” is to leave the standard filters in place to cope with the bulk of the larger particles, which is all it can be expected to do given the speed at which oil must pass through it. The By-pass Filter is then installed on a separate loop which is not on the ‘full-flow’ route, and by a much slower process, it will remove the impurities.

Finer particles, water and acids are not removed by the standard oil filters, 

and their build up is the main reason for changing engine oil.

Find Out more....

            SALIENT FEATURES

  Extends oil life by upto 5 to 6 times.

  Removes moisture, most acids and sulpher dioxides from the oil.

  Removes carbon down to approximately 3 microns.

  Extends engine life by at least 2 times.

  Reduces engine and machinery components wear.

  Reduces pollution.

  Dramatically reduces engine downtime.

  Comes complete with fitting kit.

  Is easy to install.