oil filtration equipment, oil cleaning services, by-pass oil filter, magnetic filters for oil filtration, filtratoin equipments,

in use world wide kleen oil

Kleenoil Advantages

In this age of high-tech computerized equipment, here is a product that is so simple but can save your company money. The Kleenoil system provides the ultimate in oil filtration without any complex or failure-prone parts.

Removes contaminant particles down to less than 0.5 microns

Absorbs water content.

Prevents corrosion of components

Reduces component wear (seals, piston rods, pumps etc.)

Reduces the incidence of sticking & worn value components

Extends life of in-line OEM filters and components.

End to the need to change hydraulic fluids

All properties of oil being cleaned are maintained

Filter cartridge can be changed within minutes.

No machine downtime as oil is cleaned continuously while machine is in operation

Extend fuel system life (when fitted to fuel system)

Can easily be removed and re-installed on replacement equipment

Simple to install

Used in transport and industry world-wide

Can be used with virtually any petroleum/synthetic based oil

Greatly reduced collection of waste oil by disposal companies

How do Kleenoil Bypass Filters differ from the standard main flow, OEM Filters?

Standard main flow filters are designed not to work! Think about it. If main flow filters were dense enough to keep your oil clean, would restrict the oil flow to the point of engine shutdown. Because main flow oil filters cannot be restrictive, they can only filter particles down to around 25 to 40 microns. The tolerances between the moving parts in your engine are around 3 microns. Therefore the particles in your oil between 25 and 3 microns create the friction and wear in your engine. This is the reason why you currently change your oil. You change it in an attempt to keep it as clean as possible. It is a very poor attempt! According to a study, the particles from 20 microns down to 5 microns are those responsible for up to 60% of engine wear.

If you could filter oil in the engine down to 1 micron or below, your oil would stay clean all the time. This is exactly what the Kleenoil Bypass Filter does. This process cannot be accomplished in the main oil flow. Kleenoil filters do it in a Bypass loop (thus the name Bypass Filtration). It uses a cellulose filter medium that not only filters particles down to the size of 1 micron or less, but it also filters 100% of any water that may accumulate through condensation, or through the combustion process itself. This eliminates the possibility of corrosion and hydro-cracking. Water contamination in lubricants can cut bearing life by as much as 80%.

Cost Savings
Contaminants, water, acid, carbon, wear metals, airborne dust are the limiting factors to the life of the oil. If they are removed continuously and immediately as they are formed, the reason for changing the oil is removed. The general recommendation is for the Kleenoil cartridge to be changed at the established oil change interval, and the oil and oil filters to be changed at every tenth cartridge. Cost savings are equal to 9x's the average oil and filter change cost, minus the replacement cartridge cost.

HOME